Reference Guide

no-advertise Enter the keywords no-advertise to drop all routes
containing the well-known community attribute of
NO_ADVERTISE.
All routes with the NO_ADVERTISE (0xFFFFFF02) community
attribute must not be advertised to other BGP peers.
no-export Enter the keywords no-export to drop all routes containing
the well-known community attribute of NO_EXPORT.
All routes with the NO_EXPORT (0xFFFFFF01) community
attribute must not be advertised outside a BGP
confederation boundary.
none Enter the keyword none to remove the community attribute
from routes meeting the route map criteria.
additive (OPTIONAL) Enter the keyword additive to add the
communities to already existing communities.
Defaults Not configured.
Command
Modes
ROUTE-MAP
Command
History
Version 9.0(1.3) Introduced on the S5000.
Related
Commands
ip community-list – configures community access list.
match community – redistributes routes that match the COMMUNITY attribute.
neighbor send-community – assigns the COMMUNITY attribute.
show ip bgp community – displays BGP community groups.
show ip community-lists – displays configured Community access lists.
set level
Configure a filter to specify the IS-IS level or OSPF area to which matched routes are redistributed.
S5000
Syntax
set level {backbone | level-1 | level-1-2 | level-2 | stub-
area}
Parameters
backbone Enter the keyword backbone to redistribute matched routes
to the OSPF backbone area (area 0.0.0.0).
level-1 Enter the keyword level-1 to redistribute matched routes
to IS-IS Level 1.
level-1-2 Enter the keyword level-1-2 to redistribute matched
routes to IS-IS Level 1 and Level 2.
246
Access Control Lists (ACL)