Reference Guide

(OPTIONAL) Enter the keyword permit to set the route map
default as permit. If you do not specify a keyword, the default
is permit.
deny (OPTIONAL) Enter the keyword deny to set the route map
default as deny.
sequence-
number
(OPTIONAL) Enter a number to identify the route map for
editing and sequencing with other route maps. You are
prompted for a sequence number if there are multiple
instances of the route map. The range is 1 to 65535.
Defaults Not configured.
If you do not define a keyword (permit or deny) for the route map, the permit
action is the default.
Command
Modes
CONFIGURATION
Command
History
Version 9.0(1.3) Introduced on the S5000.
Usage
Information
Use caution when you delete route maps because if you do not specify a sequence
number, all route maps with the same map-name are deleted when you use the no
route-map map-name command.
Example
Dell(conf)#route-map dempsey
Dell(config-route-map)#
Related
Commands
show config – displays the current configuration.
set as-path
Configure a filter to modify the AS path for border gateway protocol (BGP) routes.
S5000
Syntax
set as-path prepend as-number [... as-number]
Parameters
prepend as-
number
Enter the keyword prepend and then enter up to eight AS
numbers to be inserted into the BGP path information. The
range is 1 to 65535.
Defaults Not configured.
Command
Modes
ROUTE-MAP
Access Control Lists (ACL)
243