Reference Guide

match tag – redistributes routes that match a specific tag.
match tag
Configure a filter to redistribute only routes that match a specified tag value.
S5000
Syntax
match tag tag-value
Parameters
tag-value Enter a value as the tag on which to match. The range is zero
(0) to 4294967295.
Defaults Not configured.
Command
Modes
ROUTE-MAP
Command
History
Version 9.0(1.3) Introduced on the S5000.
Related
Commands
match interface – redistributes routes that match the next-hop interface.
match ip address – redistributes routes that match an IP address.
match ip next-hop – redistributes routes that match the next-hop IP address.
match ip route-source – redistributes routes that match routes advertised by other
routers.
match metric – redistributes routes that match a specific metric.
match route-type – redistributes routes that match a route type.
route-map
Enable a route map statement and configure its action and sequence number. This command also places
you in ROUTE-MAP mode.
S5000
Syntax
route-map map-name [permit | deny] [sequence-number]
Parameters
map-name Enter a text string of up to 140 characters to name the route
map for easy identification.
permit
242
Access Control Lists (ACL)