Reference Guide

Command
History
Version 9.0(1.3) Introduced on the S5000.
Related
Commands
match interface – redistributes routes that match the next-hop interface.
match ip address – redistributes routes that match an IP address.
match ip next-hop – redistributes routes that match the next-hop IP address.
match ip route-source – redistributes routes that match routes advertised by other
routers.
match route-type – redistributes routes that match a route type.
match tag – redistributes routes that match a specific tag.
match route-type
Configure a filter to match routes based on the how the route is defined.
S5000
Syntax
match route-type {external [type-1 | type-2] | internal |
level-1 | level-2 | local}
Parameters
external
[type-1| type-2]
Enter the keyword external and then enter either type-1 or
type-2 to match only on OSPF Type 1 routes or OSPF Type 2
routes.
internal Enter the keyword internal to match only on routes
generated within OSPF areas.
level-1 Enter the keyword level-1 to match IS-IS Level 1 routes.
level-2 Enter the keyword level-2 to match IS-IS Level 2 routes.
local Enter the keyword local to match only on routes generated
within the switch.
Defaults Not configured.
Command
Modes
ROUTE-MAP
Command
History
Version 9.0(1.3) Introduced on the S5000.
Related
Commands
match interface – redistributes routes that match the next-hop interface.
match ip address – redistributes routes that match an IP address.
match ip next-hop – redistributes routes that match the next-hop IP address.
match ip route-source – redistributes routes that match routes advertised by other
routers.
match metric – redistributes routes that match a specific metric.
Access Control Lists (ACL)
241