Reference Guide

match ip route-source
Configure a filter to match based on the routes advertised by routes specified in IP access lists or IP prefix
lists.
S5000
Syntax
match ip route-source {access-list | prefix-list prefix-list-
name}
Parameters
access-list-
name
Enter the name of a configured IP access list, up to 140
characters.
prefix-list
prefix-list-
name
Enter the keywords prefix-list and then enter the name
of configured prefix list, up to 140 characters.
Defaults Not configured.
Command
Modes
ROUTE-MAP
Command
History
Version 9.0(1.3) Introduced on the S5000.
Related
Commands
match interface – redistributes routes that match the next-hop interface.
match ip address – redistributes routes that match an IP address.
match ip next-hop – redistributes routes that match the next-hop IP address.
match metric – redistributes routes that match a specific metric.
match route-type – redistributes routes that match a route type.
match tag – redistributes routes that match a specific tag.
match metric
Configure a filter to match on a specified value.
S5000
Syntax
match metric metric-value
Parameters
metric-value Enter a value to match. The range is zero (0)–4294967295.
Defaults Not configured.
Command
Modes
ROUTE-MAP
240
Access Control Lists (ACL)