Reference Guide

Parameters
interface Enter the following keywords and slot/port or number
information:
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet followed by the slot/port
information.
• For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE and then enter the slot/port information.
• For the loopback interface, enter the keyword loopback
and then enter a number from zero (0) to 16383.
• For a Port Channel interface, enter the keyword port-
channel
and then enter a number. The range is from 1
to 128.
• For a VLAN, enter the keyword vlan and then enter a
number from 1 to 4094.
Defaults Not configured.
Command
Modes
ROUTE-MAP
Command
History
Version 9.0(1.3) Introduced on the S5000.
Related
Commands
match ip address – redistributes routes that match an IP address.
match ip next-hop – redistributes routes that match the next-hop IP address.
match ip route-source – redistributes routes that match routes advertised by other
routers.
match metric – redistributes routes that match a specific metric.
match route-type – redistributes routes that match a route type.
match tag – redistributes routes that match a specific tag.
match ip address
Configure a filter to match routes based on IP addresses specified in an access list.
S5000
Syntax
match ip address prefix-list-name
Parameters
prefix-list-
name
Enter the name of configured prefix list, up to 140
characters.
Defaults Not configured.
238
Access Control Lists (ACL)