Reference Guide

Defaults Not configured.
Command
Modes
ROUTE-MAP
Command
History
Version 9.0(1.3) Introduced on the S5000.
Related
Commands
set as-path – adds information to the BGP AS_PATH attribute.
match community
Configure a filter to match routes that have a certain COMMUNITY attribute in their BGP path.
S5000
Syntax
match community community-list-name [exact]
Parameters
community-
list-name
Enter the name of a configured community list.
exact (OPTIONAL) Enter the keywords exact to process only
those routes with this community list name.
Defaults Not configured.
Command
Modes
ROUTE-MAP
Command
History
Version 9.0(1.3) Introduced on the S5000.
Related
Commands
ip community-list – configures an Community Access list.
set community – specifies a COMMUNITY attribute.
neighbor send-community – sends COMMUNITY attribute to peer or peer group.
match interface
Configure a filter to match routes whose next hop is on the interface specified.
S5000
Syntax
match interface interface
To remove a match, use the no match interface interface command.
Access Control Lists (ACL)
237