Reference Guide

Defaults Clears “hit” counters for all prefix lists unless a prefix list is specified.
Command
Modes
EXEC Privilege
Command
History
Version 9.0(1.3) Introduced on the S5000.
Related
Commands
ip prefix-list — configures a prefix list.
deny
Configure a filter to drop packets meeting the criteria specified.
S5000
Syntax
deny ip-prefix [ge min-prefix-length] [le max-prefix-length]
Parameters
ip-prefix Specify an IP prefix in the network/length format. For
example, 35.0.0.0/ 8 means match the first 8 bits of address
35.0.0.0.
ge min-prefix-
length
(OPTIONAL) Enter the keyword ge and then enter the
minimum prefix length, which is a number from zero (0) to
32.
le max-prefix-
length
(OPTIONAL) Enter the keyword le and then enter the
maximum prefix length, which is a number from zero (0) to
32.
Defaults Not configured.
Command
Modes
PREFIX-LIST
Command
History
Version 9.0(1.3) Introduced on the S5000.
Usage
Information
Sequence numbers for this filter are automatically assigned starting at sequence
number 5.
If you do not use the ge or le options, only packets with an exact match to the
prefix are filtered.
Related
Commands
permit – configures a filter to pass packets.
seq – configures a drop or permit filter with a specified sequence number.
230
Access Control Lists (ACL)