Reference Guide

mac access-list extended – configures an extended MAC ACL.
show mac access-lists
Display all of the Layer 2 ACLs configured in the system, whether or not they are applied to an interface,
and the count of matches/mismatches against each ACL entry displayed.
S5000
Syntax
show mac access-lists [access-list-name] [interface type slot/
port] [in | out]
Parameters
list-name Enter the name of a configured MAC ACL, up to 140
characters.
interface type
slot/port
Enter the interface keyword followed by the interface
type and slot/port or number information. Valid slot numbers
are 0-11. The valid port numbers for each interface type are
listed below.
• For a 10-Gigabit Ethernet interface, enter the keyword
tengigabitethernet followed by slot/port numbers.
The port range is 0 to 63.
• For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE followed by slot/port numbers. The ports are
48, 52, 56, and 60.
• For a Port Channel interface, enter the keywords port-
channel followed by a number from 1 to 128.
in | out Identify whether ACL is applied on ingress or egress side.
Command
Modes
EXEC Privilege
Command
History
Version 9.0(1.3) Introduced on the S5000.
show mac accounting access-list
Display MAC access list configurations and counters (if configured).
S5000
Syntax
show mac accounting access-list access-list-name interface type
slot/port in | out
Access Control Lists (ACL)
217