Reference Guide

clear counters mac access-group
Clear counters for all or a specific MAC ACL.
S5000
Syntax
clear counters mac access-group [mac-list-name]
Parameters
mac-list-name (OPTIONAL) Enter the name of a configured MAC access list.
Command
Modes
EXEC Privilege
Command
History
Version 9.0(1.3) Introduced on the S5000.
mac access-group
Apply a MAC ACL to traffic entering or exiting an interface.
S5000
Syntax
mac access-group access-list-name {in [vlan vlan-range]}
Parameters
access-list-
name
Enter the name of a configured MAC access list, up to 140
characters.
vlan vlan-range (OPTIONAL) Enter the keyword vlan and then enter a range
of VLANs. The range is from 1 to 4094.
NOTE: This option is available only with the keywordin
option.
in Enter the keyword in to configure the ACL to filter incoming
traffic.
Defaults none
Command
Modes
INTERFACE
Command
History
Version 9.0(1.3) Introduced on the S5000.
Usage
Information
You can assign one ACL (standard or extended) to an interface.
Related
Commands
mac access-list standard – configures a standard MAC ACL.
216
Access Control Lists (ACL)