Reference Guide

Usage
Information
The authenticator completes authentication only when port-control is set to
auto.
dot1x quiet-period
Set the number of seconds that the authenticator remains quiet after a failed authentication with a client.
S5000
Syntax
dot1x quiet-period seconds
To disable quiet time, use the no dot1x quiet-time command.
Parameters
seconds Enter the number of seconds. The range is from 1 to 65535.
The default is 60.
Defaults 60 seconds
Command
Modes
INTERFACE
Command
History
Version 9.0(1.3) Introduced on the S5000.
dot1x reauthentication
Enable periodic reauthentication of the client.
S5000
Syntax
dot1x reauthentication [interval seconds]
To disable periodic reauthentication, use the no dot1x reauthentication
command.
Parameters
interval
seconds
(Optional) Enter the keyword interval followed by the
interval time, in seconds, after which reauthentication is
initiated. The range is from 1 to 31536000 (one year). The
default is 3600 (1 hour).
Defaults 3600 seconds (1 hour)
Command
Modes
INTERFACE
802.1X
163