Reference Guide

mep cross-check start-delay
Configure the amount of time the system waits for a remote MEP to come up before the cross-check
operation is started.
S5000
Syntax
mep cross-check start-delay number
Parameters
start-delay
number
Enter a start-delay in seconds. The range is from 3 to 100
seconds.
Defaults 3 ccms
Command
Modes
ETHERNET CFM
Command
History
Version 9.0(1.3) Introduced on the S5000.
ping ethernet
Send a loopback message.
S5000
Syntax
ping ethernet domain [name l level] ma-name ma-name remote
{dest-mep-id | mac-addr mac-address} source {src-mep-id | port
interface}
Parameters
name | level Enter the domain name or level.
ma-name ma-
name
Enter the keyword ma-name and then enter the maintenance
association name.
dest-mep-id Enter the MEP ID that is the target of the ping.
mac-addr
mac-address
Enter the keyword mac-addr and then enter the MAC
address that is the target of the ping.
src-mep-id Enter the MEP ID that originates the ping.
port interface Enter the keyword port and then enter the interface that
originates the ping.
Defaults none
Command
Modes
EXEC Privilege
146
802.1ag