Reference Guide

Command
Modes
INTERFACE
Command
History
Version 9.0(1.3) Introduced on the S5000.
mep cross-check
Enable cross-checking for a MEP.
S5000
Syntax
mep cross-check mep-id
Parameters
mep-id Enter the MEP ID. The range is from 1 to 8191.
Defaults none
Command
Modes
ECFM DOMAIN
Command
History
Version 9.0(1.3) Introduced on the S5000.
mep cross-check enable
Enable cross-checking.
S5000
Syntax
mep cross-check enable {port | vlan-id}
Parameters
port Down service with no VLAN association.
vlan-id Enter the VLAN to apply the cross-check.
Defaults none
Command
Modes
ECFM DOMAIN
Command
History
Version 9.0(1.3) Introduced on the S5000.
802.1ag
145