Reference Guide

FIP_Flogi_Acc : 0 FIP_FDisc_Acc : 0
FIP_Flogi_Reject : 0 FIP_FDisc_Reject : 0
FIP_Logo_Rx : 0 FIP_Logo_Resp : 0
FIP_KeepAlive : 0 InvalidCRC : 0
PFC Rx : 0 PFC Tx : 0
InvalidDestErr : 0 TotalErr : 0
FcoePktsRx : 0 FcoePktsTx : 2
CVL Sent : 0 LossOfSync : 0
Related
Commands
clear hardware system-flow – clears the statistics from selected hardware
components.
show interfaces stack-unit – displays information on all interfaces on a specific
S5000 stack member.
show processes cpu – displays the CPU usage information based on the processes
running in an S5000.
show system – displays the current status of all the stack members or a specific
member.
show hardware system-flow
Display Layer 3 ACL or QoS data for the selected stack member and stack member port-pipe.
S5000
Syntax
show hardware system-flow layer2 stack-unit unit-number port-
set port-pipe [counters]
Parameters
acl | qos For the selected stack member and stack member port-pipe,
display which system flow entry the packet hits and what
queue the packet takes as it dumps the raw system flow
tables.
stack-unit unit-
number
Enter the keyword stack-unit followed by the unit
number. The range is 0 to 11.
port-set port-
pipe [counters]
Enter the keyword port-set followed by a port-pipe
number. Valid ports are 0 or 1.
(OPTIONAL) Enter the keyword counters to display hit
counters for the selected ACL or QoS option.
Defaults none
Command
Modes
EXEC Privilege
Command
History
Version 9.0(1.3) Introduced on the S5000.
1414
Debugging and Diagnostics