Reference Guide

cpu party-bus
statistics
Enter the keywords cpu party-bus statistics, to
display the Management plane input/output counter
statistics of the pseudo party bus interface.
drops [unit 0-1
[port 0-27]]
Enter the keyword drops to display internal drops on the
selected stack member. Optionally, use the keyword
unit
with 0 or 1 to select port-pipe 0 or 1, and then use port
0-27 to select a port on that port-pipe.
stack-port
0-52
Enter the keywords stack-port and a stacking port number
to select a stacking port for which to display statistics.
Identify the stack port number as you would to identify a 10G
port that was in the same place in one of the rear modules.
unit 0-1
{counters |
details | port-
stats [detail] |
register | fc-
portstats}
Enter the keyword unit followed by 0 or 1 for port-pipe 0
or 1, and then enter one of the following keywords to
troubleshoot errors on the selected port-pipe and to give
status on why a port is not coming up to register level:
counters, details, port-stats [detail], register,
or
fc-portstats.
Defaults none
Command
Modes
• EXEC
• EXEC Privilege
Command
History
Version 9.0(1.3) Introduced on the S5000.
Example (Data-
Plane)
Dell#show hardware stack-unit 0 cpu data-plane statistics
bc pci driver statistics for device:
rxHandle :1499
noMhdr :0
noMbuf :0
noClus :0
recvd :1499
dropped :0
recvToNet :1499
rxError :0
rxFwdError :0
rxDatapathErr :0
rxPkt(COS0) :0
rxPkt(COS1) :0
rxPkt(COS2) :0
rxPkt(COS3) :0
rxPkt(COS4) :0
rxPkt(COS5) :0
rxPkt(COS6) :0
rxPkt(COS7) :1499
rxPkt(UNIT0) :1499
transmitted :1979
txRequested :1979
noTxDesc :0
txError :0
txReqTooLarge :0
txInternalError :0
1410
Debugging and Diagnostics