Reference Guide

Usage
Information
This command enables a hardware watchdog mechanism that automatically
reboots an Dell Networking OS switch/router with a single unresponsive unit. This
is a last resort mechanism intended to prevent a manual power cycle.
show hardware layer2 acl
Display Layer 2 ACL data for the selected stack member and stack member port-pipe.
S5000
Syntax
show hardware layer2 acl stack-unit unit-number port-set port-
pipe
Parameters
stack-unit unit-
number
Enter the keyword stack-unit followed by the unit
number. The range is 0 to 11.
port-set port-
pipe
Enter the keyword port-set followed by a port-pipe
number. Valid ports are 0 or 1.
Defaults none
Command
Modes
EXEC Privilege
Command
History
Version 9.0(1.3) Introduced on the S5000.
show hardware layer3
Display Layer 3 ACL or QoS data for the selected stack member and stack member port-pipe.
S5000
Syntax
show hardware layer3 {acl | qos} stack-unit unit-number port-
set port-pipe
Parameters
acl | qos Enter either the keyword acl or the keyword qos to select
between ACL or QoS data.
stack-unit unit-
number
Enter the keyword stack-unit followed by the unit
number. The range is 0 to 11.
port-set port-
pipe
Enter the keyword port-set followed by a port-pipe
number. Valid ports are 0 or 1.
1408
Debugging and Diagnostics