Reference Guide

clear hardware system-flow
Clear system-flow statistics from selected hardware components.
S5000
Syntax
clear hardware system-flow layer2 stack-unit unit-number port-
set port-pipe counters
Parameters
stack-unit unit-
number
Enter the keywords stack-unit followed by 0 to 11 for the
stack unit number and then enter one of the following
command options to clear a specific collection of data.
port-set port-
pipe counters
Enter the keyword port-set followed by a port-pipe
number. Valid ports are 0 or 1. Then enter the keyword
counters to clear the system-flow counters on the selected
port-pipe.
NOTE: S25 models (S25N, S25P, S25V, etc.) have only
port-pipe 0.
Defaults none
Command
Modes
EXEC Privilege
Command
History
Version 9.0(1.3) Introduced on the S5000.
Related
Commands
show hardware stack-unit – displays the data plane or management plane input
and output statistics of the designated component of the designated stack
member.
hardware watchdog
Set the watchdog timer to trigger a reboot and restart the system.
S5000
Syntax
hardware watchdog
Defaults Enabled.
Command
Modes
CONFIGURATION
Command
History
Version 9.0(1.3) Introduced on the S5000.
Debugging and Diagnostics
1407