Reference Guide

Command
History
Version 9.0(1.3) Introduced on the S5000.
Usage
Information
You cannot enter this command on a Master or Standby unit.
The system reboots when the off-line diagnostics complete. This is an automatic
process. A warning message appears when the offline stack-unit command
is implemented.
Warning - Diagnostic execution will cause stack-unit to reboot
after completion of diags.
Proceed with Offline-Diags [confirm yes/no]:y
Related
Commands
show environment – views the S5000 system component status (for example,
temperature, voltage).
Buffer Tuning Commands
The following sections detail the buffer tuning commands.
WARNING: Altering the buffer allocations is a sensitive operation. Do not use any buffer tuning
commands without first contacting the Dell Networking Technical Assistance Center (TAC).
buffer-profile (Configuration)
Create a buffer profile that can be applied to an interface.
S5000
Syntax
buffer-profile global {1Q|4Q}
Parameters
global Apply one of two pre-defined buffer profiles to all of the
port-pipes in the system.
1Q Enter the keyword 1Q to choose a pre-defined buffer profile
for single queue (for example, non-QoS) applications.
4Q Enter the keyword 4Q to choose a pre-defined buff fer
profile for four queue (for example, QoS) applications.
Defaults global 4Q
Command
Modes
CONFIGURATION
Command
History
Version 9.0(1.3) Introduced on the S5000.
1404
Debugging and Diagnostics