Reference Guide

You can ping the virtual addresses configured in all VRRP groups.
vrrp delay minimum
Set the delay time for VRRP initialization after an interface comes up.
S5000
Syntax
vrrp delay minimum seconds
Parameters
seconds Enter the number of seconds for the delay for VRRP
initialization after an interface becomes operational. The
range is 0 to 900 (0 indicates no delay).
Defaults 0
Command
Modes
INTERFACE
Command
History
Version 9.0(1.3) Introduced on the S5000.
Usage
Information
This command applies to a single interface. When used in conjunction with the
vrrp delay reload CLI, the later timer rules the VRRP enabling. For example, if
vrrp delay reload is 600 and the vrrp delay minimum is 300:
• When the system reloads, VRRP waits 600 seconds (10 minutes) to bring up
VRRP on all interfaces that are up and configured for VRRP.
• When an interface comes up, whether as part of a system reload or an interface
reload, the system waits 300 seconds (5 minutes) to bring up VRRP on that
interface.
Related
Command
vrrp delay reload – sets the delay time for VRRP initialization after a system reboot.
vrrp delay reload
Set the delay time for VRRP initialization after a system reboot.
S5000
Syntax
vrrp delay minimum seconds
Parameters
seconds Enter the number of seconds for the delay. The range is 0 to
900 (0 indicates no delay).
1394
Virtual Router Redundancy Protocol (VRRP)