Reference Guide

Usage
Information
The following describes output from the show vrrp brief command shown in
the Example below.
Item Description
Interface Lists the interface type, slot and port on which the VRRP
group is configured.
Grp Displays the VRRP group ID.
Pri Displays the priority value assigned to the interface. If the
track command is configured to track that interface and
the interface is disabled, the cost is subtracted from the
priority value assigned to the interface.
Pre States whether preempt is enabled on the interface.
• Y = Preempt is enabled.
• N = Preempt is not enabled.
State Displays the operational state of the interface by using one
of the following:
• NA/IF (the interface is not available).
• MASTER (the interface associated with the MASTER
router).
• BACKUP (the interface associated with the BACKUP
router).
Master addr Displays the IP address of the MASTER router.
Virtual addr(s) Displays the virtual IP addresses of the VRRP routers
associated with the interface.
Example (Brief)
Dell>show vrrp brief
Interface Grp Pri Pre State Master addr Virtual addr(s)
------------------------------------------------------------
Te 10/37 1 100 Y Master 200.200.200.200
200.200.200.201
Te 10/37 2 100 Y Master 200.200.200.200
200.200.200.202
200.200.200.203
Te 10/37 3 100 Y Master 1.1.1.1 1.1.1.2
Te 10/37 4 100 Y Master 200.200.200.200
200.200.200.206
200.200.200.207
Te 10/37 254 254 Y Master 200.200.200.200
200.200.200.204
200.200.200.205
Dell>
Usage
Infromation
The following describes output from the show vrrp command shown in the
Example below.
1390
Virtual Router Redundancy Protocol (VRRP)