Reference Guide

61
Virtual Router Redundancy Protocol
(VRRP)
The virtual router redundancy protocol (VRRP) is supported by the Dell Networking OS on the S5000
switch.
This chapter has the following sections:
• IPv4 VRRP Commands
• IPv6 VRRP Commands
IPv4 VRRP Commands
The following are IPv4 VRRP commands.
advertise-interval
Set the time interval between VRRP advertisements.
S5000
Syntax
advertise-interval seconds
To return to the default settings, use the no advertise-interval command.
Parameters
seconds Enter a number of seconds. The range is 1 to 255. The
default is 1 second.
Defaults 1 second
Command
Modes
INTERFACE-VRRP
Command
History
Version 9.0(1.3) Introduced on the S5000.
Usage
Information
Dell Networking recommends keeping the default setting for this command. If you
do change the time interval between VRRP advertisements on one router, you
must change it on all routers.
Virtual Router Redundancy Protocol (VRRP)
1383