Reference Guide

Defaults Not configured.
Command
Modes
VLT DOMAIN
Command
History
Version 9.0(1.3) Introduced on the S5000.
Usage
Information
Use the peer-down-vlan parameter to configure the VLAN from where the VLT
peer forwards packets received over the VLTi from an adjacent VLT peer that is
down. When a VLT peer with bare metal provisioning (BMP) is booting up, it sends
untagged DHCP discover packets to its peer over the VLTi. Use this configuration
to ensure that the DHCP discover packets are forwarded to the VLAN on the DHCP
server.
primary-priority
Assign the priority for master election among VLT peers.
S4810
Syntax
[no] primary-priority
Parameters
value To configure the primary role on a VLT peer, enter a lower
value than the priority value of the remote peer. The range is
1 to 65535.
Default 32768
Command
Modes
VLT DOMAIN
Command
History
Version 8.3.8.0 Introduced on the S4810.
Usage
Information
After you configure the VLT domain on each peer switch on both sides of the
interconnect trunk, by default, the Dell Networking OS elects a primary and
secondary VLT peer device. Use the priority command to reconfigure the
primary role of VLT peer switches.
1374
Virtual Link Trunking (VLT)