Reference Guide

clear vlt statistics
Clear the statistics on VLT operations.
S5000
Syntax
clear vlt statistics
Command
Modes
EXEC
Command
History
Version 9.0(1.3) Introduced on the S5000.
Related
Commands
show vlt statistics – displays statistics on VLT operations.
delay-restore
Configure the delay in bringing up VLT ports after reload or peer-link restoration between the VLT peer
switches.
S5000
Syntax
delay-restore
Parameters
delay-restore Enter the amount of time, in seconds, to delay bringing up
the VLT ports after the VLTi device is reloaded or after the
peer-link is restored between VLT peer switches. The range 1
to 1200. The default is 90 seconds.
Defaults Not configured.
Command
Modes
VLT DOMAIN
Command
History
Version 9.0(1.3) Introduced on the S5000.
Usage
Information
Use the delay-restore parameter to delay the system from bringing up the VLT
port for a brief period to allow IGMP Snooping and Layer 3 routing protocols to
converge. Use this feature:
• after a VLT device is reloaded.
• if the Peer VLT device was up at the time the VLTi link failed to the time when it
was restored.
1372
Virtual Link Trunking (VLT)