Reference Guide

Command
History
Version 9.0(1.3) Introduced on the S5000.
Example
Dell#show interfaces dei-mark
Default CFI/DEI Marking: 0
Interface Drop precedence CFI/DEI
------------------------------------------------
Te 0/1 Green 0
Te 0/1 Yellow 1
Te 8/9 Yellow 0
Te 8/40 Yellow 0
Related
Commands
dei mark
stack-unit stack-group
Configure stacking group specified by ID.
S5000
Syntax
[no] stack-unit unit-number stack-group stack-group-number
Parameters
unit-number Enter the stack unit number. The range is 0 to 11..
stack-group-id Enter the stack group number. The range is 0 to 15.
[no] Use no stack-unit unit-id stack-group stack-id
to remove the current stack group configuration.
Command
Modes
CONFIGURATION
Command
History
Version 9.0(1.3) Introduced on the S5000.
Usage
Information
WARNING: The following message displays to confirm the command: All
non-default configurations on the related member ports
ports (<ports listed here>) will be removed. Do you want to
continue (y/n)?
If you enter “y”, all non-default configurations on any
member ports of the current stack group is removed when the unit is
rebooted.
1364
VLAN Stacking