Reference Guide

Command
Modes
EXEC Privilege
Command
History
Version 9.0(1.3) Introduced on the S5000.
Example
Dell#show interfaces dei-honor
Default Drop precedence: Green
Interface CFI/DEI Drop precedence
---------------------------------------------
Te 0/1 0 Green
Te 0/1 1 Yellow
Te 8/9 1 Red
Te 8/40 0 Yellow
Related
Commands
dei honor
show interfaces dei-mark
Display the dei mark configuration.
S5000
Syntax
show interfaces dei-mark [interfacetype slot/port | stack—unit
unit-number port-set number]
Parameters
interface-type
slot/port
Enter the interface keyword followed by the interface
type and slot/port or number information. Valid slot numbers
are 0-11. The valid port numbers for each interface type are
listed below.
• For a 10-Gigabit Ethernet interface, enter the keyword
tengigabitethernet followed by slot/port numbers.
The port range is 0 to 63.
• For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE followed by slot/port numbers. The ports are
48, 52, 56, and 60.
• For a Port Channel interface, enter the keywords port-
channel followed by a number from 1 to 128.
stack-unit unit-
number port-
set number
Enter the keyword stack-unit followed by the unit
number. The range is 0 to 11. Then enter the keyword port-
set
followed by the port-pipe number.
Command
Modes
EXEC Privilege
VLAN Stacking
1363