Reference Guide

dei mark
Set the DEI value on egress according to the color currently assigned to the packet.
S5000
Syntax
dei mark {green | yellow} {0 | 1}
Parameters
0 | 1 Enter the bit value you want to map to a color.
green | red |
yellow
Choose a color:
• Green: High priority packets that are the least preferred
to be dropped.
• Yellow: Lower priority packets that are treated as best-
effort.
Defaults All the packets on egress are marked with DEI 0.
Command
Modes
INTERFACE
Command
History
Version 9.0(1.3) Introduced on the S5000.
Usage
Information
You must first enable DEI for this configuration to take effect.
Related
Commands
dei enable – enables DEI.
member
Assign a stackable VLAN access or trunk port to a VLAN. The VLAN must contain the vlan-stack
compatible
command in its configuration.
S5000
Syntax
member interface-type slot/port
To remove an interface from a Stackable VLAN, use the no member interface-
type slot/port
command.
Parameters
interface-type
slot/port
Enter the interface type and slot/port or number information.
Valid slot numbers are 0-11. The valid port numbers for each
interface type are listed below.
• For a 10-Gigabit Ethernet interface, enter the keyword
tengigabitethernet followed by slot/port numbers.
The port range is 0 to 63.
VLAN Stacking
1361