Reference Guide

Defaults Not configured.
Command
Modes
CONFIGURATION
Command
History
Version 9.0(1.3) Introduced on the S5000.
Usage
Information
The number parameter in the ntp trusted-key command must be the same
number as the number parameter in the ntp authentication-key command. If
you change the
ntp authentication-key command, you must also change the
ntp trusted-key command.
Related
Commands
ntp authentication-key – sets an authentication key for NTP.
ntp authenticate – enables the NTP authentication parameters you set.
ntp update-calendar
Configure the Dell Networking OS to update the calendar (the hardware clock) with the NTP-derived
time.
S5000
Syntax
ntp update-calendar [minutes]
To return to default setting, use the no ntp update-calendar command.
Parameters
minutes (OPTIONAL) Enter the number of minutes between updates
from NTP to the hardware clock. The range is 1 to 1440. The
default is 60 minutes.
Defaults Not enabled.
Command
Modes
CONFIGURATION
Command
History
Version 9.0(1.3) Introduced on the S5000.
show calendar
Display the current date and time based on the switch hardware clock.
S5000
Syntax
show calendar
System Time and Date
1343