Reference Guide

Parameters
number Specify a number for the authentication key. The range is 1
to 4294967295.
This number must be the same as the number parameter
configured in the ntp trusted-key command.
md5 Specify that the authentication key is encrypted using MD5
encryption algorithm.
0 Specify that authentication key is entered in an unencrypted
format (default).
7 Specify that the authentication key is entered in DES
encrypted format.
key Enter the authentication key in the previously specified
format.
Defaults NTP authentication is not configured by default. If you do not specify the option [0
| 7], 0 is selected by default.
Command
Modes
CONFIGURATION
Command
History
Version 9.0(1.3) Introduced on the S5000.
Usage
Information
After configuring the ntp authentication-key command, configure the ntp
trusted-key command to complete NTP authentication.
Dell Networking OS uses DES encryption to store the key in the startup-config
when you enter the ntp authentication-key command.
Related
Commands
ntp authenticate – enables NTP authentication.
ntp trusted-key – configures a trusted key.
ntp broadcast client
Set up the interface to receive NTP broadcasts from an NTP server.
S5000
Syntax
ntp broadcast client
To disable broadcast, use the no ntp broadcast client command.
Defaults Disabled.
Command
Modes
INTERFACE
System Time and Date
1339