Reference Guide

Command
Modes
CONFIGURATION
Command
History
Version 9.0(1.3) Introduced on the S5000.
Related
Commands
calendar set – sets the hardware clock.
clock summer-time date – sets a date (and time zone) on which to convert the
switch to daylight saving time on a one-time basis.
show clock – displays the current clock settings.
clock timezone
Configure a timezone for the switch.
S5000
Syntax
clock timezone timezone-name offset
To delete a timezone configuration, use the no clock timezone command.
Parameters
timezone-
name
Enter the name of the timezone. You cannot use spaces.
offset Enter one of the following:
• a number from 1 to 23 as the number of hours in addition
to universal time coordinated (UTC) for the timezone.
• a minus sign (-) followed by a number from 1 to 23 as the
number of hours.
Defaults Not configured.
Command
Modes
CONFIGURATION
Command
History
Version 9.0(1.3) Introduced on the S5000.
Usage
Information
Coordinated universal time (UTC) is the time standard based on the International
Atomic Time standard, commonly known as Greenwich Mean time. When
determining system time, you must include the differentiator between UTC and
your local timezone. For example, San Jose, CA is the Pacific Timezone with a UTC
offset of -8.
1336
System Time and Date