Reference Guide

start-day Enter the number of the day. The range is 1 to 31. You can
enter the name of a month to change the order of the
display to time day month year.
start-year Enter a four-digit number as the year. The range is 1993 to
2035.
start-time Enter the time in hours:minutes. For the hour variable, use
the 24-hour format; example, 17:15 is 5:15 pm.
end-day Enter the number of the day. The range is 1 to 31. You can
enter the name of a month to change the order of the
display to time day month year.
end-month Enter the name of one of the 12 months in English. You can
enter the name of a day to change the order of the display to
time day month year.
end-time Enter the time in hours:minutes. For the hour variable, use
the 24-hour format; example, 17:15 is 5:15 pm.
end-year Enter a four-digit number as the year. The range is 1993 to
2035.
offset (OPTIONAL) Enter the number of minutes to add during the
summer-time period. The range is 1 to1440. The default is
60 minutes.
Defaults Not configured.
Command
Modes
CONFIGURATION
Command
History
Version 9.0(1.3) Introduced on the S5000.
Related
Commands
calendar set – sets the hardware clock.
clock summer-time recurring – sets a date (and time zone) on which to convert
the switch to daylight saving time each year.
show clock – displays the current clock settings.
clock summer-time recurring
Set the software clock to convert to daylight saving time on a specific day each year.
S5000
Syntax
clock summer-time time-zone recurring [start-week start-day
start-month start-time end-week end-day end-month end-time
[offset]]
1334
System Time and Date