Reference Guide

scp: After the keyword scp:, enter the location of the source file
in the format: //userid:password@host-ip-address/
file-pathname or press Enter to launch a prompt
sequence.
tftp: After the keyword tftp:, enter the location of the source
file in the format:
//host-ipaddress/file-pathname or
press Enter to launch a prompt sequence.
usbflash: After the keyword usbflash:, enter the location of the
source file in the external flash in the format: //file-path
or press Enter to launch a prompt sequence.
file-path Enter the path and filename to be used to upgrade the Dell
Networking OS image.
stack-unit
{stack-unit-id |
all}
Enter the keyword stack-unit: followed by the stack unit
ID of a member unit or all to upgrade the boot image on all
stack member units. Valid stack-unit ID numbers are 0 to 11.
A: | B: Enter the Dell Networking OS partition to be upgraded with
the new image.
Defaults None
Command
Modes
EXEC Privilege
Command
History
Version 9.0(1.3) Introduced on the S5000.
Usage
Information
You must reload Dell Networking OS after executing this command. Use the
upgrade system stack-unit command to copy Dell Networking OS from the
management unit to one or more stack members.
Example
Dell#upgrade system ?
flash: Copy from flash file system (flash://filepath)
ftp: Copy from remote file system, IPv4 or IPv6, (ftp://
userid:password@hostip/filepath)
scp: Copy from remote file system, IPv4 or IPv6, (scp://
userid:password@hostip/filepath)
stack-unit: Sync image to the stack-unit
tftp: Copy from remote file system, IPv4 or IPv6, (tftp://
hostip/filepath)
Dell#upgrade system ftp://username:password@10.11.1.1/FTOS-
SH-9.0.1.3.bin
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!
Erasing Sseries ImageUpgrade Table of Contents, please wait
.!........................................................
..........................................................
..........................................................
..........................................................
..........................................................
..........................................................
..........................................................
..........................................................
Stacking Commands
1321