Reference Guide

Cpu1minUsage (90%)
01:01:34: %STKUNIT7-M:CP %SYSADM-5-TASK_CPU_THRESHOLD: 1min
cpu utilization of stack-unit 10 has exceeded the threshold.
Top three processes are dla (88.75%), KP (2.50%), frrpaRecv
(0.00%)
!.!.!.!.!01:01:40: %STKUNIT7-M:CP %SYSADM-5-CPU_THRESHOLD:
Overall cpu usage of stack-unit 9 is above threshold.
Cpu1minUsage (96%)
01:01:40: %STKUNIT7-M:CP %SYSADM-5-TASK_CPU_THRESHOLD: 1min
cpu utilization of stack-unit 9 has exceeded the threshold.
Top three processes are dla (94.83%), KP (2.17%), frrpaRecv
(0.00%)
!.01:01:40: %STKUNIT7-M:CP %SYSADM-5-CPU_THRESHOLD: Overall
cpu usage of stack-unit 11 is above threshold. Cpu1minUsage
(96%)
01:01:40: %STKUNIT7-M:CP %SYSADM-5-TASK_CPU_THRESHOLD: 1min
cpu utilization of stack-unit 11 has exceeded the threshold.
Top three processes are dla (94.58%), KP (2.25%), frrpaRecv
(0.00%)
!.!.!.!.!01:01:45: %STKUNIT7-M:CP %SYSADM-5-CPU_THRESHOLD:
Overall cpu usage of stack-unit 0 is above threshold.
Cpu1minUsage (91%)
01:01:46: %STKUNIT7-M:CP %SYSADM-5-TASK_CPU_THRESHOLD: 1min
cpu utilization of stack-unit 0 has exceeded the threshold.
Top three processes are dla (89.75%), KP (2.67%), frrpaRecv
(0.00%)
!.!.!.!.!!.!.!.!.!!.!.!.!.!.!!.!.!.!.!!.!.!.!.!.!.!!.!.!.!.!.!!
.!.!.!.!.!!.!.!.!.!.!.!!.!.!.!.!!.!.!.!.!!.!.!.!.!.!.!!.!.!.!.!
.!!.!.!.!.!.!.!!.!.!.!.!.!!.!.!.!.!!.!.!.!.!.!
Bootflash image upgrade for all completed successfully.
upgrade system (stack unit)
Upgrade the Dell Networking OS image on one or all stack units in an S5000 stack from the master
switch.
S5000
Syntax
upgrade system {flash://file-path | ftp://file-path | scp://
file-path | tftp://file-path | usbflash://file-path} | stack-
unit {stack-unit—id | all}{A: | B:}}
Parameters
boot Enter the keyword system to change the Dell Networking
OS image.
flash: After the keyword flash:, enter the location of the source
file in the internal flash in the format:
//file-pathname or
press Enter to launch a prompt sequence.
ftp: After the keyword ftp:, enter the location of the source file
in the format:
//userid:password@host-ipaddress/
file—pathname or press Enter to launch a prompt
sequence.
1320
Stacking Commands