Reference Guide

12
13
stack-unit priority
Configure the ability of an S5000 switch to become the management unit of a stack.
S5000
Syntax
stack-unit unit-number priority priority-level
Parameters
unit-number Enter the stack-unit number. The range is 0 to 11.
priority priority-
level
Specify the management priority assigned to the switch,
where 1 is the lowest priority and 14 is the highest priority.
The switch with the highest priority value is selected as the
management unit if the active management unit fails or on
the next reload.
Defaults 0
Command
Modes
CONFIGURATION
Command
History
Version 9.0(1.3) Introduced on the S5000.
Related
Commands
• reload – reboots Dell Networking OS.
• show system – displays the status of all stack members or a specific member.
stack-unit provision
Pre-configure a logical stack-unit number for an S5000 switch to join the stack. This is an optional
command that is executed on the management unit.
S5000
Syntax
stack-unit unit-number provision S5000
Parameters
unit-number Enter the stack-unit number. The range is 0 to 11.
S5000 Enter the model identifier of the switch to be added as a
stack member. This identifier is also referred to as the
provision type.
Stacking Commands
1315