Reference Guide

Failover Type: Hot Failover
Auto reboot Stack-unit: Disabled
Auto failover limit: 3 times in 60 minutes
-- Stack-unit Failover Record --
------------------------------------------------
Failover Count: 0
Last failover timestamp: None
Last failover Reason: None
Last failover type: None
-- Last Data Block Sync Record: --
------------------------------------------------
Stack Unit Config: succeeded Apr 17 2013 09:07:10
Start-up Config: succeeded Apr 17 2013 09:07:10
Runtime Event Log: succeeded Apr 17 2013 09:07:10
Running Config: succeeded Apr 17 2013 09:07:10
ACL Mgr: succeeded Apr 17 2013 09:07:10
LACP: no block sync done
STP: no block sync done
SPAN: no block sync done
Dell#
Related
Commands
redundancy disable-auto-reboot – prevents the system from auto-rebooting if it
fails.
show system stack-ports
Display information about the stacking ports on all switches in the S5000 stack.
S5000
Syntax
show system stack-ports [status | topology]
Parameters
status (OPTIONAL) Enter the keyword status to display the
command output without the Connection field.
topology (OPTIONAL) Enter the keyword topology to limit the table
to just the Interface and Connection fields.
Defaults none
Command
Modes
• EXEC
• EXEC Privilege
Command
History
Version 9.0(1.3) Introduced on the S5000.
Usage
Information
The following describes output from the show system stack-ports command
shown in the Example below.
Field Description
1312
Stacking Commands