Reference Guide

Command
History
Version 9.0(1.3) Introduced on the S5000.
Related
Commands
default logging monitor – returns the logging monitor parameters to the default
setting.
logging on
Specify that debug or error messages are asynchronously logged to multiple destinations, such as the
logging buffer, Syslog server, or terminal lines.
S5000
Syntax
logging on
To disable logging to logging buffer, Syslog server and terminal lines, use the no
logging on command.
Defaults Enabled.
Command
Modes
CONFIGURATION
Command
History
Version 9.0(1.3) Introduced on the S5000.
Usage
Information
When you use the no logging on command, messages are logged only to the
console.
Related
Commands
logging – enables logging to the Syslog server.
logging buffered – sets the logging buffered parameters.
logging console – sets the logging console parameters.
logging monitor – sets the logging parameters for the terminal connections.
logging source-interface
Specify that the IP address of an interface is the source IP address of Syslog packets sent to the Syslog
server.
S5000
Syntax
logging source-interface interface
To disable this command and return to the default setting, use the no logging
source-interface
command.
Simple Network Management Protocol (SNMP) and Syslog
1291