Reference Guide

logging history size
Specify the number of messages stored in the Dell Networking OS logging history table.
S5000
Syntax
logging history size size
To return to the default values, use the no logging history size command.
Parameters
size Indicate a value as the number of messages to be stored.
The range is 0 to 500. The default is 1 message.
Defaults 1 message
Command
Modes
CONFIGURATION
Command
History
Version 9.0(1.3) Introduced on the S5000.
Usage
Information
When the number of messages reach the limit you set with the logging history
size command, older messages are deleted as newer ones are added to the table.
Related
Commands
show logging – displays information logged to the history buffer.
logging monitor
Specify which messages are logged to Telnet applications.
S5000
Syntax
logging monitor [level]
To disable logging to terminal connections, use the no logging monitor
command.
Parameters
level Indicate a value from 0 to 7 or enter one of the following
parameters: emergencies, alerts, critical, errors,
warnings, notifications, informational, or
debugging. The default is 7 or debugging.
Defaults 7 or debugging
Command
Modes
CONFIGURATION
1290
Simple Network Management Protocol (SNMP) and Syslog