Reference Guide

Command
Modes
CONFIGURATION
Command
History
Version 9.0(1.3) Introduced on the S5000.
Related
Commands
logging trap – limit messages logged to the Syslog servers based on severity.
logging
Configure an IP address or host name of a Syslog server where logging messages are sent. Multiple
logging servers of both IPv4 and/or IPv6 can be configured.
S5000
Syntax
logging {ipv4-address | ipv6-address | hostname}
To disable logging, use the no logging command.
Parameters
ipv4-address |
ipv6-address
Enter an IPv4 address (A.B.C.D) or IPv6 address (X:X:X:X::X)
address.
hostname Enter the name of a host already configured and recognized
by the switch.
Defaults Disabled.
Command
Modes
CONFIGURATION
Command
History
Version 9.0(1.3) Introduced on the S5000.
Related
Commands
logging on – enables the logging asynchronously to logging buffer, console,
Syslog server, and terminal lines.
logging trap – enables logging to the Syslog server based on severity.
logging buffered
Enable logging and specify which messages are logged to an internal buffer. By default, all messages are
logged to the internal buffer.
S5000
Syntax
logging buffered [level] [size]
To return to the default values, use the default logging buffered command.
1286
Simple Network Management Protocol (SNMP) and Syslog