Reference Guide

read name (OPTIONAL) Enter the keyword read followed by a name (a
string of up to 20 characters long) as the read view name.
The default is GlobalView and is assumed to be every object
belonging to the internet (1.3.6.1) OID space.
write name (OPTIONAL) Enter the keyword write followed by a name (a
string of up to 20 characters long) as the write view name.
notify name (OPTIONAL) Enter the keyword notify followed by a name
(a string of up to 20 characters long) as the notify view name.
access access-
list-name
(Optional) Enter the standard IPv4 access list name (a string
up to 16 characters long).
ipv6 access-
list-name
(Optional) Enter the keyword ipv6 followed by the IPv6
access list name (a string up to 16 characters long).
access-list-
name ipv6
access-list-
name
(Optional) Enter both an IPv4 and IPv6 access list name.
Defaults As above.
Command
Modes
CONFIGURATION
Command
History
Version 9.0(1.3) Introduced on the S5000.
Usage
Information
The following Example specifies the group named harig as a version 3 user
requiring both authentication and encryption and read access limited to the read
named rview.
NOTE: The number of configurable groups is limited to 16 groups.
Example
Dell#conf
Dell(conf)# snmp-server group harig 3 priv read rview
Dell#
Related
Commands
show snmp group – displays the group name, security model, view status, and
storage type of each group.
show running-config – displays the SNMP running configuration.
Simple Network Management Protocol (SNMP) and Syslog
1275