Reference Guide

!
Dell(conf)#snmp-server community guest ro snmp-ro-acl
Dell(conf)#
Related
Commands
ip access-list standard – names (or selects) a standard access list to filter based on
IP address.
ipv6 access-list – configures an access list based on IPv6 addresses or protocols.
show running-config snmp – displays the current SNMP configuration and
defaults.
snmp-server contact
Configure contact information for troubleshooting this SNMP node.
S5000
Syntax
snmp-server contact text
To delete the SNMP server contact information, use the no snmp-server
contact command.
Parameters
text Enter an alphanumeric text string, up to 55 characters long.
Defaults none
Command
Modes
CONFIGURATION
Command
History
Version 9.0(1.3) Introduced on the S5000.
snmp-server enable traps
Enable SNMP traps.
S5000
Syntax
snmp-server enable traps [notification-type] [notification-
option]
To disable traps, use the no snmp-server enable traps [notification-
type] [notification-option] command.
Simple Network Management Protocol (SNMP) and Syslog
1271