Reference Guide

528 0 528 528
343 lacp 4800512 233472
71984 0 71984 71984
332 ipm1 5165056 659456
34184 0 34184 34184
319 acl 5701632 1085440 107052
66256 107052 40796
Dell#
show software ifm
Display interface management (IFM) data.
S5000
Syntax
show software ifm {clients [summary] | ifagt number | ifcb
interface-type slot/port | stack-unit unit-number | trace-
flags}
Parameters
clients Enter the keyword clients to display IFM client
information.
summary (OPTIONAL) Enter the keyword summary to display brief
information about IFM clients.
ifagt number Enter the keyword ifagt followed by the number of an
interface agent to display software pipe and IPC statistics.
ifcb interface-
type slot/port
Enter the keyword ifcb followed by the interface type and
slot/port or number information. The valid port numbers for
each interface type are listed below.
• For a 10-Gigabit Ethernet interface, enter the keyword
tengigabitethernet followed by slot/port numbers.
The port range is 0 to 63.
• For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE followed by slot/port numbers. The ports are
48, 52, 56, and 60.
• For a Loopback interface, enter the keyword loopback
followed by a number from 0 to 16383.
• For a Management interface, enter the keyword
managementethernet followed by slot/port numbers.
The port is 0.
• For a Null interface, enter the keywords null 0.
• For a Port Channel interface, enter the keywords port-
channel followed by a number from 1 to 128.
• For a VLAN interface, enter the keyword vlan followed
by a VLAN id number from 1 to 4094.
126
Control and Monitoring