Reference Guide

Command
History
Version 9.0(1.3) Introduced on the S5000.
Usage
Information
Dell Networking OS must have the default CAM profile with the default microcode
before you enable L2PT.
protocol-tunnel rate-limit
Enable traffic rate limiting per box.
S5000
Syntax
protocol-tunnel rate-limit rate
To reset the rate limit to the default, use the no protocol-tunnel rate-limit
rate command.
Parameters
rate Enter the rate in frames per second. The range is 75 to 3000.
The default is 75.
Defaults 75 frames per second.
Command
Modes
CONFIGURATION
Command
History
Version 9.0(1.3) Introduced on the S5000.
Example
Dell#
Dell#conf
Dell(conf)#protocol-tunnel rate-limit 1000
Dell(conf)#
Related
Commands
show protocol-tunnel – displays tunneling information for all VLANs.
show running-config – displays the current configuration.
show protocol-tunnel
Display protocol tunnel information for all or a specified VLAN-Stack VLAN.
S5000
Syntax
show protocol-tunnel [vlan vlan-id]
1254
Service Provider Bridging