Reference Guide

vlan-id vlan-id Enter the keywords vlan-id followed by the VLAN to which
the host belongs. The range is 2 to 4094.
ip ip-address Enter the keyword ip followed by the IP address that the
server is leasing.
interface type
slot/port
Enter the interface keyword followed by the interface
type and slot/port or number information. Valid slot numbers
are 0-11. The valid port numbers for each interface type are
listed below.
• For a 10-Gigabit Ethernet interface, enter the keyword
tengigabitethernet followed by slot/port numbers.
The port range is 0 to 63.
• For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE followed by slot/port numbers. The ports are
48, 52, 56, and 60.
slot/port Enter the slot and port number of the interface.
lease time Enter the keyword lease followed by the amount of time
the IP address is leased. The range is 1 to 4294967295.
Defaults none
Command
Modes
• EXEC
• EXEC Privilege
Command
History
Version 9.0(1.3) Introduced on the S5000.
Related
Commands
show ip dhcp snooping – displays the contents of the DHCP binding table.
ip dhcp snooping database
Delay writing the binding table for a specified time.
S5000
Syntax
ip dhcp snooping database write-delay minutes
Parameters
minutes The range is 5 to 21600.
Defaults none
Command
Modes
CONFIGURATION
Security
1247