Reference Guide

Parameters
hostname (OPTIONAL) Enter the IP address or the hostname of the
remote device.
ipv4 address (OPTIONAL) Enter the IP address in dotted decimal format
A.B.C.D.
ipv6-address
prefix-length
(OPTIONAL) Enter the IPv6 address in the x:x:x:x::x format
followed by the prefix length in the /x format. The range is /0
to /128.
NOTE: The :: notation specifies successive hexadecimal
fields of zeros.
-c encryption
cipher
Enter the following encryption cipher. (For v2 clients only.):
• 3des-cbc: Force ssh to use 3des-cbc encryption cipher.
-l username (OPTIONAL) Enter the keyword -l followed by the user
name used in this SSH session. The default is the user name
of the user associated with the terminal.
-m HMAC
algorithm
Enter one of the following HMAC algorithms to use. (For v2
clients only.):
• hmac-sha1: Force ssh to use the hmac-sha1 HMAC
algorithm.
• hmac-sha1-96: Force ssh to use the hmac-sha1-96
HMAC algorithm.
• hmac-md5: Force ssh to use the hmac-md5 HMAC
algorithm.
• hmac-md5-96: Force ssh to use the hmac-md5-96
HMAC algorithm.
-p port-
number
(OPTIONAL) Enter the keyword -p followed by the port
number. The range is 1 to 65536. The default is 22.
-v {1 | 2} (OPTIONAL) Enter the keyword -v followed by the SSH
version 1 or 2. The default is the version from the protocol
negotiation.
Defaults As above.
Command
Modes
EXEC Privilege
Command
History
Version 9.0(1.3) Introduced on the S5000.
Usage
Information
Dell Networking OS supports both inbound and outbound SSH sessions using IPv4
or IPv6 addressing. Inbound SSH supports accessing the system through the
management interface as well as through a physical Layer 3 interface.
Example
Dell#ssh 10.11.8.12 ?
-c Encryption cipher to use (for v2 clients only)
-l User name option
1244
Security