Reference Guide

Parameters
enable Enter the key word enable to start the SSH server.
port port-
number
(OPTIONAL) Enter the keyword port followed by the port
number of the listening port of the SSH server. The range is 1
to 65535. The default is 22.
[version {1 | 2}] (OPTIONAL) Enter the keyword version followed by the
SSH version 1 or 2 to specify only SSHv1 or SSHv2.
NOTE: If you enable FIPS mode, you can only select
version 2.
Defaults Default listening port is 22.
Command
Modes
CONFIGURATION
Command
History
Version 9.0(1.3) Introduced on the S5000.
Usage
Information
This command enables the SSH server and begins listening on a port. If a port is
not specified, listening is on SSH default port 22.
Example
Dell# conf
Dell(conf)# ip ssh server port 45
Dell(conf)# ip ssh server enable
Dell#
Related
Commands
show ip ssh – displays the ssh information.
show crypto
Display the public part of the SSH host-keys.
S5000
Syntax
NOTE: Some of the parameters in this command require licensing to access.
For more information, contact your Dell Networking representative.
show crypto key mypubkey {rsa | rsa1}
Parameters
Key Enter the keyword key to display the host public key.
mypubkey Enter the keyword mypubkey to display the host public key.
rsa Enter the keyword rsa to display the host SSHv2 RSA public
key.
rsa1 Enter the keyword rsa1 to display the host SSHv1 RSA public
key.
1240
Security