Reference Guide

Command
History
Version 9.0(1.3) Introduced on the S5000.
Related
Commands
dot1x authentication (Interface) – enables dot1x on an interface.
dot1x authentication (Interface)
Enable dot1x on an interface; dot1x must be enabled both globally and at the interface level.
S5000
Syntax
dot1x authentication
To disable dot1x on an interface, use the no dot1x authentication command.
Defaults Disabled.
Command
Modes
INTERFACE
Command
History
Version 9.0(1.3) Introduced on the S5000.
Related
Commands
dot1x authentication (Configuration) – enables dot1x globally.
dot1x auth-fail-vlan
Configure an authentication failure VLAN for users and devices that fail 802.1X authentication.
S5000
Syntax
dot1x auth-fail-vlan vlan-id [max-attempts number]
To delete the authentication failure VLAN, use the no dot1x auth-fail-vlan
vlan-id [max-attempts number] command.
Parameters
vlan-id Enter the VLAN Identifier. The range is 1 to 4094.
max-attempts
number
(OPTIONAL) Enter the keywords max-attempts followed
number of attempts desired before authentication fails. The
range is 1 to 5. The default is 3.
Defaults 3 attempts
1224
Security