Reference Guide

radius-server retransmit
Configure the number of times the switch attempts to connect with the configured RADIUS host server
before declaring the RADIUS host server unreachable.
S5000
Syntax
radius-server retransmit retries
To configure zero retransmit attempts, use the no radius-server retransmit
command.
To return to the default setting, use the radius-server retransmit 3
command.
Parameters
retries Enter a number of attempts that Dell Networking OS tries to
locate a RADIUS server. The range is zero (0) to 100. The
default is 3 retries.
Defaults 3 retries
Command
Modes
CONFIGURATION
Command
History
Version 9.0(1.3) Introduced on the S5000.
Related
Commands
radius-server host – configures a RADIUS host.
radius-server timeout
Configure the amount of time the RADIUS client (the switch) waits for a RADIUS host server to reply to a
request.
S5000
Syntax
radius-server timeout seconds
To return to the default value, use the no radius-server timeout command.
Parameters
seconds Enter the number of seconds between an unsuccessful
attempt and the Dell Networking OS times out. The range is
zero (0) to 1000 seconds. The default is 5 seconds.
Defaults 5 seconds
Command
Modes
CONFIGURATION
Security
1219