Reference Guide

• For a Port Channel interface, enter the keywords port-
channel followed by a number. The range is 1 to 128.
• For VLAN interface, enter the keyword vlan followed by
a number from 1 to 4094.
Defaults Not configured.
Command
Modes
CONFIGURATION
Command
History
Version 9.0(1.3) Introduced on the S5000.
radius-server deadtime
Configure a time interval during which non-responsive RADIUS servers to authentication requests are
skipped.
S5000
Syntax
radius-server deadtime seconds
To disable this function or return to the default value, use the no radius-server
deadtime
command.
Parameters
seconds Enter a number of seconds during which non-responsive
RADIUS servers are skipped. The range is 0 to 2147483647
seconds. The default is 0 seconds.
Defaults 0 seconds
Command
Modes
CONFIGURATION
Command
History
Version 9.0(1.3) Introduced on the S5000.
radius-server host
Configure a RADIUS server host.
S5000
Syntax
radius-server host {hostname | ipv4-address | ipv6-address}
[auth-port port-number] [retransmit retries] [timeout seconds]
[key [encryption-type] key]
1216
Security