Reference Guide

access-class
access-list-
name
Enter the keywords access-class followed by the name of
a configured access control list (either a IP access control list
or MAC access control list).
nopassword Enter the keyword nopassword to specify that the user
should not enter a password.
password Enter the keyword password followed by the encryption-
type or the password.
secret Enter the keyword secret followed by the encryption-
type or the password.
encryption-
type
Enter an encryption type for the password that you will
enter.
• 0 directs Dell Networking OS to store the password as
clear text. It is the default encryption type when using the
password option.
• 7 to indicate that a password encrypted using a DES
hashing algorithm will follow. This encryption type is
available with the
password option only.
• 5 to indicate that a password encrypted using an MD5
hashing algorithm will follow. This encryption type is
available with the
secret option only, and is the default
encryption type for this option.
password Enter a string up to 32 characters long.
privilege level Enter the keyword privilege followed by a number from
zero (0) to 15.
secret Enter the keyword secret followed by the encryption type.
Defaults The default encryption type for the password option is 0. The default encryption
type for the secret option is 0.
Command
Modes
CONFIGURATION
Command
History
Version 9.0(1.3) Introduced on the S5000.
Usage
Information
To view the defined user names, use the show running-config user
command.
Related
Commands
password – specifies a password for users on terminal lines.
show running-config – views the current configuration.
1214
Security