Reference Guide

Command
Modes
LINE
Command
History
Version 9.0(1.3) Introduced on the S5000.
Related
Commands
line – applies an authentication method list to the designated terminal lines.
ip access-list standard – names (or selects) a standard access list to filter based on
the IP address.
ip access-list extended – names (or selects) an extended access list based on the IP
addresses or protocols.
enable password
Change the password for the enable command.
S5000
Syntax
enable password [level level] [encryption-type] password
To delete a password, use the no enable password [encryption-type]
password [level level] command.
Parameters
level level (OPTIONAL) Enter the keyword level followed by a number
as the level of access. The range is from 1 to 15.
encryption-
type
(OPTIONAL) Enter the number 7 or 0 as the encryption type.
Enter a 7 followed by a text string as the hidden password.
The text string must be a password that was already
encrypted by a Dell Networking router.
Use this parameter only with a password that you copied
from the show running-config file of another Dell
Networking router.
password Enter a text string, up to 32 characters long, as the clear text
password.
Defaults No password is configured. level = 15.
Command
Modes
CONFIGURATION
Command
History
Version 9.0(1.3) Introduced on the S5000.
Usage
Information
Use this command to define a password for a level and use the privilege level
(CONFIGURATION mode) command to control access to command modes.
Passwords must meet the following criteria:
1204
Security