Reference Guide

command Enter the command’s keywords to assign the command to a
certain access level. You can enter one or all of the
keywords.
Defaults Not configured.
Command
Modes
CONFIGURATION
Command
History
Version 9.0(1.3) Introduced on the S5000.
Usage
Information
Use the enable password command to define a password for the level to which
you are assigning privilege or access.
privilege level (LINE mode)
Change the access level for users on the terminal lines.
S5000
Syntax
privilege level level
To delete access to a terminal line, use the no privilege level level
command.
Parameters
level level
Enter the keyword level followed by a number for the
access level. The range is 0 to 15.
Level 1 is EXEC mode and Level 15 allows access to all CLI
modes.
Defaults level = 15
Command
Modes
LINE
Command
History
Version 9.0(1.3) Introduced on the S5000.
Authentication and Password Commands
To manage access to the system, use the following the commands.
1200
Security